2
1
PANEL DESCRIPTION
1
y
SET•LOCK KEY [SET
]
➥
Enters set mode when pushed. (p. 74)
➥
Keys the lock function ON and OFF when pushed for
1 sec. (p. 12)
u
MONITOR•CHANNEL NAME KEY [MONI
]
➥
Push to switch the monitor function ON and OFF. (p. 13)
➥
In memory and call channel mode, switches the channel
names or number ON and OFF. (p. 29)
i
OUTPUT POWER•DUPLEX KEY [LOW
]
➥
Each push changes the output power selection. (p. 16)
➥
Select DUP–, DUP+ and simplex operation when
pushed for 1 sec. (p. 17)
o
TONE•TONE SCAN KEY [TONE
]
➥
Each push selects a tone function. (pgs. 17, 48)
• Tone encoder, pocket beep, tone squelch or tone function
OFF can be selected.
➥
Push for 1 sec. to start/stop the tone scan function.
(p. 51)
❍
While in the digital mode operation with the installing an
optional Digital unit UT-115.
➥
Each push select the digital code
(CSQL)
squelch func-
tion, call sign
(DSQL)
squelch, pocket beep function
(CSQL or DSQL)
. (p. 67)
!0
MEMORY/CALL•PRIORITY KEY [M/CALL
]
➥
Push to select and toggle memory, call and weather
channel* modes. (pgs. 24, 35, 83)
*Weather channels available for USA versions only.
➥
Starts priority watch when pushed for 1 sec. (p. 44)
!1
VFO/MHz TUNING•SCAN KEY [V/MHz
]
➥
Selects and toggles VFO mode and 1 MHz (or 10 MHz
for some versions) tuning when pushed. (p. 9)
➥
Starts scan when pushed for 1 sec. (p. 38)
• Cancels a scan when pushed during a scan.
!2
BANK•OPTION KEY [BANK
]
➥
Push to select memory bank condition during memory
mode. (p. 32)
➥
Push for 1 sec. to enter the DTMF or option set mode.
!3
TUNING DIAL [DIAL]
Selects the operating frequency (p. 9), memory channel
(p. 24), the setting of the set mode item and the scanning
direction (p. 38).
D
Microphone connector
(front panel view)
q
+8 V DC output (Max. 10 mA)
w
Channel up/down
e
8 V control IN
r
PTT
t
GND (microphone ground)
y
MIC (microphone input)
u
GND
i
Data IN
q
i
OPT
SCAN
PRIO
T-SCAN
DUP
ANM
LOCK
Summary of Contents for IC-2200H
Page 2: ......