background image

IMPORTANT

 

READ  THIS  INSTRUCTION  MANUAL 

CAREFULLY

 

before  attempting  to  operate  the 

repeater.

SAVE THIS INSTRUCTION MANUAL–

 

This 

manual  contains  important  safety  and  operating 
instructions for the CY FR series.

EXPLICIT DEFINITIONS

WORD

DEFINITION

WARNING

Personal injury, fire hazard or electric
shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only.
No risk of personal injury, fire or
electric shock.

PRECAUTION

WARNING HIGH VOLTAGE! NEVER

 

attach an antenna or internal antenna connector 
during transmission. This may result in an 
electrical shock or burn.

WARNING HIGH VOLTAGE! NEVER

 

install the antenna at any place that person touch 
the antenna easily during transmission. This may 
result in an electrical shock or burn.

NEVER 

apply AC to the [BATTERY] terminals 

on the repeater rear panel. This could cause a fire 
or damage the repeater.

NEVER

 apply more than 16 V DC, such as a 

24 V battery, to the [BATTERY] terminals on the 
repeater rear panel. This could cause a fire or 
damage the repeater.

NEVER 

let metal, wire or other objects touch 

any internal part or connectors on the rear panel 
of the repeater. This may result in an electric 
shock.

NEVER 

expose the repeater to rain, snow or 

any liquids.

AVOID

 using or placing the repeater in areas 

with temperatures below –30°C (–22°F) or above 
+60°C (+140°F). Be aware that temperatures 
on a vehicle’s dashboard can exceed 80°C 
(+176°F), resulting in permanent damage to the 
repeater if left there for extended periods.

AVOID 

placing the repeater in excessively dusty 

environments or in direct sunlight.

AVOID

 putting anything on top of the repeater. 

This will obstruct airflow.
Place the repeater in a secure place to avoid 
inadvertent use by children.

BE CAREFUL! 

The heatsink will become hot 

when operating the repeater continuously for long 
periods.

BE CAREFUL! 

If a linear amplifier is 

connected, set the repeater’s RF output power 
to less than the linear amplifier’s maximum 
input level, otherwise, the linear amplifier will be 
damaged. 

Use Icom microphones only. Other manufacturer’s 
microphones have different pin assignments, and 
connection to the CY FR series may damage the 
repeater.

For U.S.A. only

CAUTION: 

This repeater is intended for use 

as a fixed repeater with the antenna located 
outdoors on the rooftop or on antenna tower.

 The Icom America Systems logo is a trademark                  
 of Icom, Inc.

i

Summary of Contents for CY 6000

















Reviews: