ICOM 7100 Go-kit Connections
SRCARES-250_7100Connections – Rev 1.0
P a g e
| 3
AJT-07/18/21
9.
Connect the four ponged Molex connector on the red/black DC power cable to the main unit’s
[DC 13.8V] port.
10.
Connect the PowerPole end of the same red/black DC power cable to the [OUT] port of the
PWRgate PG40S.
11.
If a backup battery is available, connect the PowerPole end of the battery cable to the [BAT]
port of the PWRgate PG402.
12.
Locate the Powerwerx Switching Power Supply SS-30DV and connect the ring terminals on the
power supply cable to the rear of the power supply. Ensure the black and red ring connectors
are not touching and are securely tightened.
13.
Connect the PowerPole end of the same red/black powercable connected to the power supply
to the [PS] port of the PWRgate PG40s.
