Setting the Room Temperature (Setpoint Temperature)
Step 1:
Press one of the arrow buttons; the current temperature setting displays.
Step 2:
Press the or arrow button until the desired temperature setting displays.
The new temperature setting is automatically saved. After 5 seconds, the display returns to showing the
current room temperature.
Setting a New Temperature Differential
The default temperature differential is 1°. When your room temperature varies by 1°F, the thermostat
turns your system on. If you notice your system turning on and off too frequently, increase the
temperature differential.
Step 1:
Remove cover. Insert a coin or screwdriver in slot at the top if needed.
Step 2:
For SC2000: Removing batteries for 10 seconds and then reinsert them.
For SC2001: Press the
Reset
button once (see diagrams on Page 1).
Step 3:
When
Diff01
displays, press the or arrow buttons to select the desired dirrerential setting.
Step 4:
Replace the thermostat cover.
Starting the Thermostat
Step 1:
Move the
Fan Auto/On
switch into the
Auto
position.
Step 2:
Move the
Cool/Off/Heat
switch to
Cool
or
Heat
, depending on the season.
Operation
Summary of Contents for SC 2000
Page 19: ......
