Iclebo YCR-M05, User Manual

Page: 7 / 20

Remote Control
1. Press power button of the remote control.
2. Press start/stop ( ) button of the remote control.
3. Press power button to stop the operation.
4. To change mode, press power button, and use mode button to select desired cleaning method,
and then press start/stop ( ) button.
5. Default mode is Auto + Climb.
If you want only floor cleaning, press Climb button of the remote controller to change to general mode
and then proceed with the cleaning.
6. Additional information for Max mode and Spot mode
If you want to use the cleaner as long as possible, clean in Max mode. In Max mode, it starts in Auto
(Mapping) mode to perform overall cleaning, and when it is completed, it changes to Random mode for
additional cleaning. (Cleaning of about 120~160 min. is possible according to indoor environment.)
※ In the floor environments such as carpet, rug, or patterned tiles or marble, set to Climb mode for cleaning.
6
Dust bin
Blade
Filter
Antibacterial
/blackout filter
Filter case
Set-time
status
Power
Mode
button
non-slip
pad
Infrared generator
Charging display
Charging terminal
●
C
o
m
p
o
n
e
n
ts
●
R
e
fe
re
n
c
e
● Charging station ● Dust bin
● Remote control ● Display screen
Power button
Time setting
button
Time setting
button
Start/stop
button
Charge button
Timer button
Door sill height
button
Cleaning mode
button
Mode button
Direction button
Enter button
Start/stop
button
Random
Mode
Auto
(Navigation)
Mode
Clock/
cleaning
time
Climb
mode
Mopping
mode
Battery
status