16
●
C
he
ck
b
efo
re
re
pa
ir r
ep
or
t
Below is the explanation about the most occurred ‘breakdowns’
when using this product.
If you can’t solve the problem with information below,
please call your Customer service center.
Problem
C a u s e
S o l u t i o n
It is not
cleaning well.
▶ Dust bin is full.
▶ Main brush is dirty.
▶ Filter is contaminated.
▶ See <Product control & maintenance> and
empty the dust bin.
▶ See <Product control & maintenance> and
use main brush.
▶ See <Product control & maintenance> and
clean the dirty filter.
When I press
the power button
to turn on the
robot cleaner,
it turns off
automatically.
▶ Battery is low.
▶ Battery is enough but the dust
bin is full.
▶ Main brush is clogged with
hair and dust.
▶ Charge the robot cleaner.
▶ See <Product control & maintenance> and
empty the dust bin.
▶ See <Product control & maintenance> and
clean main brush.
The robot cleaner
is not responding.
▶ Power switch is turned off.
▶ Battery of remote control is out.
▶ Infrared sensor & beam part of the
remote control is blocked or dirty.
▶ Remote control is too close to the
charging station.
▶ Check the power switch on the bottom
of the main body.
▶ Re-charge the robot cleaner.
▶ Insert the battery of robot cleaner properly.
▶ Change the battery of the remote control.
▶ Wipe the infrared sensor & beam part
of the remote control with soft cloth.
▶ Keep a distance from the charging station
and press the button again towards
the robot cleaner.
The robot cleaner
is not charging.
▶
Charging
station or robot
cleaner is not connected
properly to the plug.
▶ Connect the power of charging station &
robot cleaner properly.
After cleaning,
the robot cleaner
is not returning
to the
charging station.
▶ Power of the charging station
is not connected properly.
▶ Infrared generator & ejector
on the Charging station and
detector of the robot cleaner
is dirty.
▶ Cleaning was started with auto-mode
but not from the charging station.
▶ Connect the power of the charging station
properly.
▶ Move the charging station. No objects must
be placed within left/right 19.7 inches,
front 5 feet from the
Charging
station.
This is to enable the robot cleaner to return
to the charging station automatically
after cleaning.
▶ Robot cleaner must start cleaning from
the charging station to return to
the charging station after cleaning.
Summary of Contents for YCR-M05
Page 14: ......