background image

LIMITED WARRANTY TO ORIGINAL PURCHASER

This iCLEBO brand product, as supplied and distributed by SYNET Electronics Inc (DBA: iCLEBO USA), and delivered as manufactured, in the carton to the original customer 

purchaser, is warranted by iCLEBO USA against manufacturing defects in workmanship and materials for the qualifying limited warranty period as follows: 1 YEAR (365 days) from 

the date of purchase. Register your product online at http://www.iCleboUSA.com/registration.html to validate your warranty.  The iCLEBO® limited warranty covers manufacturing 

defects in materials and workmanship that might occur during normal use of your robot.  Consumable components such as filters and brushes are not covered in the warranty. 

Defects resulting from improper maintenance, unauthorized repairs or failure to follow operational instructions are some of the items not covered. Damage caused by the use of 

accessories and parts, including batteries that were not manufactured by iCLEBO, void the limited warranty.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and, except to the extent otherwise expressly provided in this statement, 

non-commercial use of this product and shall not apply to the following, including but not limited to: damage which occurs in shipment; applications and uses for which this product 

was not intended; failures or problems which are caused by products or equipment not supplied by iCLEBO USA; accidents, misuse, abuse, neglect, misapplication, fire, water, 

lightning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper installation; product alteration or modification; improper or 

unauthorized repair; exterior finish or cosmetic damage; failure to follow operation instructions, customer adjustments, maintenance and environmental instructions that are covered 

and prescribed in the instruction book; use of non-iCLEBO or unauthorized parts, supplies, accessories or equipment which damage this product or result in service problems; 

failures or problems due to incompatibility with other equipment.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, 

INCLUD-ING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE 

EXPRESS WARRANTY PERIOD STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH 

RESPECT TO THIS PRODUCT SHALL BE BINDING ON ICLEBO CORPORATION. iCLEBO USA SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO 

REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO 

USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF ICLEBO HAS BEEN ADVISED OF THE POSSIBILITY OF 

SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST iCLEBO USA BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY 

iCLEBO USA AND CAUSING THE ALLEGED DAMAGE.WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR 

INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS 

PRODUCT SOLD BY iCLEBO USA NOT CAUSED DIRECTLY BY THE GROSS NEGLIGENCE OF ICLEBO CORPORATION. THIS LIMITED WARRANTY SHALL NOT EXTEND 

TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow 

limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. 

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

CAUTION: 

DO NOT REMOVE COVER OF ICLEBO ROBOT, ITS BATTERY OR THE CHARGER. THIS CAN REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING 

TO QUALIFIED SERVICE PERSONNEL. NO USER-SERVICEABLE PARTS INSIDE. Always be careful when using your ICLEBO Robot. To reduce the risk of injury or damage, 

keep these safety precautions in mind when setting up, using and maintaining your equipment.

POWER & CHARGING:

 Charge only using standard US (120V AC) outlets. Operate your iCLEBO only from the type of power source indicated on the marking label. If you are 

not sure of the type of power supplied in your home, consult your local power company.  Product may not be used with any type of power converter. Any such use will immediately 

void the Warranty. Use only the charger supplied by the manufacturer to charge this device.  Do not use a charger with a damaged cord or plug. Charge indoors only.  Never handle 

chargers with wet hands. Always remove the battery and disconnect ICLEBO from the charger before cleaning. 

USE:

 iCLEBO is an indoor device only, do not use outdoors. iCLEBO is not a toy. Do not use iCLEBO on wet surfaces or where contact with or immersion in water is a possible. Do 

not sit or stand on this device. Small children and pets should be supervised if iCLEBO is in use. Keep loose clothing, hair and body parts away from brushes and moving parts. Do 

not use this device to pick up anything that is burning or smoking. Before using this device, pick up objects like clothing, loose papers, pull cords for blinds and curtains, power 

cords, and any fragile objects. If the device passes over a power cord and drags it, there is a chance an object could tumble off a table or shelf. If the room to be cleaned contains a 

balcony, a physical barrier should be used to prevent access to the balcony and ensure safe operation. Do not use this device to pick up flammable or combustible liquids such as 

gasoline. Always remove the battery before long-term storage or transportation. 

© 2014 SYNET Electronics Inc(DBA: iCLEBO USA). 220 Technology Drive Suite 220, Irvine CA 92681, USA. All rights reserved.

PARTS & LABOR:

 This limited warranty is valid only on products purchased and used in North America. It does not include installation, removal or reinstallation. Warranty 

repairs must be performed by iCLEBO USA’s authorized service center. To receive warranty service, the original dated bill of sale must be presented upon request as proof of 

purchase to iCLEBO USA’s authorized service center. To obtain warranty service, support or other information, visit our website at www.iCleboUSA.com or by calling our Toll-free 

number at 888-372-8990. iCLEBO USA will repair or replace this product, at our discretion, and at no charge with new or reconditioned parts, if found to be defective during the 

limited warranty period specified above. To request service, the purchaser must contact iCLEBO USA for problem determination and service procedures. iCLEBO USA does not 

warrant uninterrupted or error-free operation of the product. All replaced parts and products become the property of iCLEBO USA and must be returned to iCLEBO USA. 

Replacement parts and products assume the remaining original warranty, or 60 days.

GENERAL: 

Read all safety and operating instructions before operating ICLEBO Robot. Retain the safety and operating instructions for future reference. Heed all warnings on 

ICLEBO Robot, battery, charger and in owner’s manual. Follow all operating and use instructions. Do not attempt to service ICLEBO yourself.

iCLEBO Important Safety Instructions

Summary of Contents for YCR-M05





















Reviews: