manualshive.com logo in svg

iCleanse Swift 5x, User Manual

Introducing the iCleanse Swift 5x - an innovative device that keeps your belongings pristine! This user-friendly product requires no complicated setup or installation. For easy operation, refer to our comprehensive User Manual, available for free download at manualshive.com. Unlock the power of iCleanse Swift 5x today!

Share
Download
background image

The iCleanse Swift 5x provides a chemical-free, general-purpose disinfection for 

mobile phones and tablets.

The Swift 5x has been designed for minimal contact with what you place 

in it, allowing maximum surface coverage by germicidal light during the 
disinfection cycle.

Please read through this guide thoroughly to ensure proper use of your Swift 5x.

Meet your Swift 5x

About your iCleanse Swift 5x

3

Summary of Contents for Swift 5x



















Reviews:

No comments

Related manuals for Swift 5x

Puretec Radfire RI Series User Manual preview
Radfire RI Series
Brand: Puretec Pages: 28
vioguard Cubby User Manual preview
Cubby
Brand: vioguard Pages: 12
CRYSTALCLEAR 12 GPM Maintenance Booklet preview
12 GPM
Brand: CRYSTALCLEAR Pages: 15

Brands by name

Popular brands

Load more brands