13
Using and Maintaining your Swift 5x
After replacing the lamps follow this procedure to reset the lamp cycles to 4,000.
Step 1: Hold “+” and enter 1234” on the keypad.
Step 2: You will hear a beep along with the “ADMIN MOSE” light illuminating on
the front panel.
Step 3: Enter “+77+0000” on the keypad.
Step 4: You should hear a beep and see the “SERVICE LAMPS” light on the front
panel turning off.
Step 5: Hold “-” and enter “1234” on the keypad.
Step 6: You will hear a beep along with the “ADMIN MODE” light on the front
panel turning off.
Step 7: Switch off the unit and turn it back on after 5 seconds.
Resetting the Lamp Cycle Counter
