Icidu NI-707533 User Manual Download Page 92

Page: 92 / 110

NI-707533

Gigabit Wireless Router 300N

-86-

the Router as a backup file and restore the configuration via a backup file as shown in Figure
4-79.

Figure 4-79 Backup & Restore Configuration



Click the

Backup

button to save all configuration settings as a backup file in your local

computer.



To upgrade the Router's configuration, follow these instructions.



Click the

Browse…

button to locate the update file for the Router, or enter the exact path

to the Setting file in the text box.



Click the

Restore

button.



Note:

The current configuration will be covered by the uploading configuration file. The upgrade process
lasts for 20 seconds and the Router will restart automatically. Keep the Router on during the
upgrading process to prevent any damage.

4.17.6 Reboot

Choose menu “

System Tools

→

Reboot

”

, you can click the

Reboot

button to reboot the Router

via the next screen.

Figure 4-80 Reboot the Router

Some settings of the Router will take effect only after rebooting, which include



Change the LAN IP Address (system will reboot automatically).



Change the DHCP Settings.



Change the Wireless configurations.



Change the Web Management Port.



Upgrade the firmware of the Router (system will reboot automatically).

Summary of Contents for NI-707533















































































































Search results

Summary of Contents for NI-707533

Reviews:

Related manuals for NI-707533

Brands by name

Popular brands

Icidu NI-707533, User Manual

Search results

Summary of Contents for NI-707533

Reviews:

Related manuals for NI-707533

Brands by name

Popular brands