Icidu 300MBPS, Manual

Page: 30 / 61

23
Data encryption Select the data encryption type from drop-down
menu. This setting must be identical with the
setting of wireless access point you with to
connect.
ASCII / PASSPHRASE When the encryption type is ‘WEP’, it’s required
to input a set of ‘passphrase’ to connect to
wireless access point. Check ‘ASCII’ or
‘PASSPHRASE’ depends on the security setting
of access point, and input it in the box; if you
select ‘PASSPHRASE’ you also need to select
the length of the key.
The passphrase must be identical with the
setting of wireless access point you with to
connect.
Key index Select WEP key index. For most of access points
you can select ‘1’, but please refer to the setting
of the access point.
Network key / Confirm
network key When the encryption type is ‘WPA’ or
‘WPA2-PSK’, it’s required to input a set of
‘passphrase’ to connect to wireless access
point. Please input the same passphrase in two
boxes for confirmation.
EAP TYPE /
Tunnel /
Provision Mode When authentication type is any of 802.1X, you
have to select EAP type, tunnel, and provision
mode from dropdown menu. This setting must
be identical with your 802.1x authentication
server.
Username / Identity /
Domain / Password Please input 802.1x related authentication
information here.
Certificate If certification is required to authenticate with
802.1x authentication server, please select a
local certificate from dropdown list.
PAC Check this box and PAC (Privilege Access
Certificate) will be automatically selected.
When all required parameters are set, click ‘OK’ to create and save a new
profile.