T-CAM 80 P-SERIES/T-CAM 160 XT USER MANUAL
35
12. Troubleshooting
If the user encounters any problems while using the imager, refer to the following options. If
the problem persists, disconnect the power and contact the customer support department.
12-1 Thermal imager does not power on
•
Ensure battery is installed
•
Replace old battery
•
Charge battery
12-2 Thermal imager shuts off unexpectedly
•
Replace old battery
•
Charge battery
12-3 No thermal image
•
Open the lens cap
12-4 Camera out of focus
•
Adjust focus ring
12-5 Temperature readings are incorrect
•
Turn off the device; then, turn it back on
•
Ensure the correct temperature range is selected
◦
The default temperature range is -20 °C to 150 °C (-4 °F to 302 °F)
◦
When measuring high temperature objects ensure the temperature range is
set to the 0 °C to 500 °C (32 °F to 932 °F) range
•
Device is at proper height
•
Ensure device is in focus
•
Adjust emissivity
•
Adjust for ambient temperature
•
Perform a NUC operation
12-6 Memory card error
•
Insert memory card
