background image

T-CAM 300 P-SERIES USER MANUAL

2

©Copyright 2021, Infrared Cameras, Inc. - All rights reserved. The contents 

of this document may not be reproduced in whole or in parts without the 

written consent of the copyright owner.

Printed in the United States of America.

2105 W. Cardinal Dr.

Beaumont, TX 77705

(866) 861-0788

www.infraredcameras.com

Revision: 6.2021-002

THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE SPECIFICATIONS 

OF THE PRODUCT WITHOUT PRIOR NOTIFICATION. THE MANUFACTURER 

ALLOWS HIMSELF THE RIGHT TO MODIFY WITHOUT ANY PRELIMINARY 

OPINION THE TECHNICAL SPECIFICATIONS OF THE PRODUCT. THIS 

MANUAL MAY CONTAIN TECHNICAL INACCURACIES OR TYPOGRAPHICAL 

ERRORS.

NOTICE ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS 

MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT 

WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER WARRANTY 

HEREIN, ALL DOCUMENT FILES AND SOFTWARE ARE PROVIDED “AS IS” WITH 

ALL FAULTS. ICI DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, 

INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS 

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A 

COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE 

ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET 

THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY 

THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE 

OR LIMITED WARRANTY, CONTACT YOUR ICI REPRESENTATIVE FOR A COPY.

IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL, 

CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT 

LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT 

OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS BEEN 

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Summary of Contents for T-CAM 300 P Series

































Reviews: