SOUND DETECT & SOUND DETECT PRO USER MANUAL
44
8-6-2 Gas Mode Settings
8-6-2-1 Gas Mode Head-up Display (HUD)
Enable the Gas Mode HUD as follows:
1.
Using the touchscreen, tap the Display Window to open the main menu.
2.
Tap More; then, select Gas Leak. A window appears and the user gains
access to mode settings.
3.
Toggle the Gas Leak HUD to the On position by tapping the switch. The
switch turns blue and HUD is seen on the Display Window when active.
Disable the settings by tapping the switch again. The switch turns gray and
HUD disappears when inactive.
4.
Tap outside window to exit the mode settings window. The main menu
closes automatically due to inactivity.
8-6-2-2 Leak Cost Estimator
The acoustic device has a built-in algorithm to estimate the cost of compressed
air leaks. To obtain an accurate measurement the energy cost must be known.
Typically, this means the local price (per kWh). Be sure the currency and energy
cost are updated in tandem to obtain accurate results.
Leak cost display on the screen via the HUD.
Enable the cost estimator as follows:
1.
Using the touchscreen, tap the Display Window to open the main menu.
2.
Tap More; then, select Gas Leak. A window appears and the user gains
access to mode settings.
3.
Toggle the Gas Leak HUD to the On position by tapping the switch. The
switch turns blue and HUD is seen when active. Disable the settings by
tapping the switch again. The switch turns gray and HUD disappears when
inactive.
•
Tap on an input box. A keyboard appears.
•
Use the keyboard by tapping the touchscreen to input the preferred
numerical values.
•
Press the Close Keyboard icon to close keyboard.
4.
Tap the drop-down box next to Gas Value; then, tap to select a unit.
5.
Tap outside window to exit the mode settings window. The main menu
closes automatically due to inactivity.
