SOUND DETECT & SOUND DETECT PRO USER MANUAL
26
8-1 Charging Instructions
8-1-1 How to Charge the Acoustic Device via Power Adapter
Charge the battery for a minimum of 3 hours before using the device for the first
time. It takes 4-6 hours to charge an empty battery to full.
When the battery is fully charged, the device displays 4 grids of electricity and
can be used for up to 6 hours; 3 grids can be used for about 2.5 to 3 hours; 2
grids can be used for about 1.5 to 2 hours; 1 grid can be used for about half an
hour to 1 hour.
1.
Plug one end of th Type-C cable into the power adapter.
2.
Plug the other end of the Type-C Cable into the Type-C Charging port on
the acoustic device.
3.
Plug the power adapter cord of the battery charging base into a 110v/120V
electrical outlet.
8.
Operation Instructions
ENSURE THE BATTERY IS NEAR ROOM TEMPERATURE BEFORE CHARGING.
DO NOT CHARGE THE BATTERY IN EXTREMELY HOT OR COLD AREAS. THE
BATTERY CAPACITY MAY BE DECREASED IF CHARGED IN AN EXTREME
TEMPERATURE ENVIRONMENT.
THE STATUS LED POWERS ON WHEN THE BATTERY IS BEING CHARGED. THE
STATUS LED TURNS OFF WHEN CHARGING IS COMPLETE.
THE DEVICE IS NOT MEANT TO BE USED WHILE CHARGING. KEEP THE DEVICE
POWER OFF WHEN CHARGING.
IT TAKES 4-6 HOURS TO CHARGE AN EMPTY BATTERY TO FULL.
WHEN THE BATTERY IS FULLY CHARGED, THE DEVICE DISPLAYS 4 GRIDS OF
ELECTRICITY AND CAN BE USED FOR UP TO 6 HOURS; 3 GRIDS CAN BE USED
FOR ABOUT 2.5 TO 3 HOURS; 2 GRIDS CAN BE USED FOR ABOUT 1.5 TO 2
HOURS; 1 GRID CAN BE USED FOR ABOUT HALF AN HOUR TO 1 HOUR.
THE USER MUST USE THE DESIGNATED TYPE-C CHARGING PORT FOR
CHARGING THE ACOUSTIC DEVICE. THE ACOUSTIC DEVICE CANNOT BE
CHARGED FROM THE STANDARD TYPE-C INTERFACE PORT.
