background image

FMX 400 P SERIES IR CAMERA USER MANUAL

17

 

Height of camera

 

□ Average male 70 ± 4 inches; Average female 65 ± 4 inches

 

□ 5’4” – 5’8” will image 4’8” to 6’4” individual

 

Larger will require a height adjustment to camera

 

□ Distance of camera to individual being screened is 4 – 5 feet

 

The individual’s face and Temperature Reference Source should be in the frame

 

□ Distance to Temperature Reference Source: 6-7 feet

 

Behind the individual being screened yet visible within the frame of the image

 

Protect the camera from exposure to direct sunlight to avoid damage to the camera 

sensor 

10-6 Temperature Reference Source

 

On tripod or other stable stand, in front of background, and positioned for visibility 

within the frame of the image

 

□ Temperature is set at 35 °C (95 °F) or 37 °C (98.6 °F)

 

 Warm-up time is 15 minutes

10-7 Software

 

Set up the software according to the instructions

 

Documentation can be found online on the IR Flash STM web page under the 

Downloads section or at this address:

https://infraredcameras.com/ir-flash-stm-manual/

10-8 Final Step

Final validation is dependent upon a signed copy of this checklist from each person 

responsible for each site.

Upon completion please sign below:

  

 

ICI representative:  

 

 

Company representative:

Signature: _____________________________  

Signature: _______________________________

           

 

 

 

            

Print Name: ____________________________ 

Print Name: ______________________________

           

 

 

             

Date: ________________

Summary of Contents for FMX 400 P Series





















Reviews: