FMX 300X P-SERIES USER MANUAL
23
The camera can be connected to alarm switch signal (0~DC 5V) input and switch
output (no voltage). An external power supply is required when connecting the
alarm. The specific wiring method is shown in the figure below.
The camera can be connected to alarm switch signal (0~DC 5V) input and switch
output (no voltage). An external power supply is required when connecting the
alarm. The specific wiring method is shown in the figure below.
7-2 Alarm Interface Setup
7-3 Memory Card
A.
B.
Use a standard screwdriver
to detach and remove the
memory bay cover.
Insert the Micro-SD Card into the
top of the device until a clicking
sound is heard.
