background image

FMX 300X P-SERIES USER MANUAL

25

8.

Operation Instructions

8-1      IP Address Configuration

The  FMX  300X  comes  configured  with  static  IP  address  for  the  infrared 

camera.  The  infrared  camera  lies  at  192.168.10.117.  Connecting  the  computer 

requires setting the IPv4 settings of the Ethernet port to a static IP address in 

the same “Class C.” We suggest applying 192.168.10.110 with a subnet mask of 

255.255.255.0. There is no need to set a gateway as this is a direct connection 

from the computer to the cameras with no router. 

Be sure the static IP address is set by doing the following:

1. 

Click on Windows icon.

2. 

Click on Settings.

3. 

Click on Network and Internet.

4. 

Click on Ethernet.

5.  Click on Change Adapter Settings.

6. 

Right click on Ethernet and choose properties.

7. 

Double click on Internet Protocol Version 4 (TCP/IPV4) Properties.

8. 

The IP address should read 192.168.10.110. If it does not, click in the box and 

fill in the correct number.

9. 

The Subnet Mask should read 255.255.255.0. If it does not, click in the box 

and fill in the correct number.

10.  Click Ok.

Summary of Contents for FMX 300X P Series



































Reviews: