Installation
25
FRONT DOOR OPENING
ASGX EN 3000 ÷ 7000
The door is adjusted in the factory with standard opening to the left (Sx) and hinges on the right (Dx).
ASGX EN 3000 ÷ 7000
ASGX EN 8000 ÷ 17000
–
Loosen the retaining screws (1) located on the hinges of door arms.
–
Remove the bolts retaining the doors (2)
–
Open the doors using the handles (3)
m
IMPORTANT
Retaining screws (1) reduce vibrations. When closing the doors, tighten again the retaining screws (1).
1
2
3
ASGX EN 8000 ÷ 17000
NOTE
Check the correct adjustment of tie-rods and hinges, making sure that, during the closing phase, the seal is evenly pressed along
the whole middle section of the circumference.
a
DANGER
THERE MUST BE NO FLUE GAS LEAKS.
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz
