ICHRoboter iCleaner-200D User Manual Download Page 20

Page: 20 / 20

-19-

7 Safety Checklist

◇

Please shut down the iCleaner-200D according to chapter 4.3 when you

have finished cleaning the pool.

◇

Please inspect and clean the impeller & Guide Vane according to chapter

5.1, after use.

◇

If you are not going to use the iCleaner-200D for an extended period of

time, make sure iCleaner-200D & Power Box is turned off, and store it in a

dry, shady & well ventilated area, with a temperature range between

0-40

℃

◇

If you want to reuse iCleaner-200D after it has been stored for an extended

period of time, please check the iCleaner-200D for visual damage (cracks

& rust) prior to use. Once you are sure iCleaner-200D is free from damage,

test run it, and if it performs as expected, then allow it to run automatically.

◇

If the iCleaner-200D requires repair, please contact your local distributor, or

contact [email protected].

Summary of Contents for iCleaner-200D





















Search results

Summary of Contents for iCleaner-200D

Reviews:

Related manuals for iCleaner-200D

Brands by name

Popular brands

ICHRoboter iCleaner-200D, User Manual

Search results

Summary of Contents for iCleaner-200D

Reviews:

Related manuals for iCleaner-200D

Brands by name

Popular brands