Page
4
C) Backdoor Button
The backdoor button will always play “
Beethoven’s Fifth
” and cannot be assigned to any other
built-in selection. You can however set iChime to play the user recorded audio that is contained
in user location 6.
If user location 6 had been recorded
,
each time the back door button is
pressed the audio contained in user location 6 will be played.
D) Button Functionality
MODE Button:
This is used to select between Built-In Selections or User Recordings. Pressing
this button will toggle the selection and will also announce the current Category Name or User
Location.
SELECT Button:
Used to choose either the built-in Category or the User Location, depending on
the chosen mode.
PLAY Button:
Pressing
PLAY
auditions the sound that will be played when the front doorbell
pushbutton is pressed. Each time this button is pressed the next sound in the group is played. In
order to lock in a single selection press and hold
PLAY
until a beep is heard and the last sound
that was played will always play when the front door button is pressed. Pressing and holding
PLAY
again or playing a selection from another category will cause iChime to revert to cycling
through the selections.
REC Button:
This button is only active when the unit is in the User Recordings mode. When this
is the case, press and hold
REC
and audio will be recorded into the current location (1 of 6)
.
The
Red light next to the button will come on during recording. Release
REC
to stop the recording.
VOL Button:
There are four volume levels. Press the + or the - side of the
VOL
button to
increase or decrease the volume..
MICROPHONE IN:
The microphone input is the small hole under the
VOL
button.. It is used to
make user recordings.