![background image](http://html.mh-extra.com/html/ichime/the-play-anything-doorbell/the-play-anything-doorbell_instruction-manual_610633003.webp)
Page
3
A) Built-In Selections
When
MODE
is set to Built-in Selections, choose the category by pressing the
SELECT
button
until you hear the desired category name. After a category is chosen, each time the
PLAY
button
(or the front doorbell button) is pressed, iChime will play the next sound or song in that category.
To play only one selection on every press, find the selection you want using the
PLAY
button,
then press and hold the
PLAY
button again until you hear a short beep. If you want that selection
to play twice (for a longer greeting) keep holding
PLAY
until you hear two more short beeps. That
selection is now "locked in" and will be the only one played.
B) User Recordings
When
MODE
is set to User Recordings, you have your choice of six locations to record into. Each
location can contain up to 45 seconds. Choose the location by pressing the
SELECT
button. If
anything is currently recorded in that location, it will automatically play after the location number is
announced. Pressing
PLAY
will play the recording again, or will beep if nothing is recorded. This
is a safeguard so iChime will still act as a doorbell even if nothing has been recorded.
To record, press and hold the
REC
button until the red light next to it comes on, then speak or
play the audio into the built in microphone (which is the small hole under the volume button).
Release
REC
when you are done, then press
PLAY
to see how it sounds. Repeat until you have
the recording the way you want it.
To delete a recording, press the
REC
button and release it within about ½ second.