2
Sharp edges hazard
！
Please wear protection gloves
while unpacking and installing
this product!
Installation work must be
executed by professional
technician
！
3. Installation
3.1 Unpacking
Caution! Fins are very sharp, please DO NOT take
off the protection corrugated cardboard before installation.
After removing the cardboard, DO wear the protection
gloves through the installation work.
Unit cooler is with extending headers and drain pan,
can be only placed vertically.
DO NOT
put drain pan
side or top side directly on the ground. If need to put the
unit cooler on the ground, please keep it vertically with
cardboard under and prevent falling down. The pallet
package comes with a black adjustable belt. Once take
one unit out, please use this belt to retighten the whole
package to avoid other unit falling down.
Before shipping, all unit coolers have been
pressurized inside to block moisture. While using
copper tube cutter to cut the inlet/outlet tubes before
connection, do watch out the gas blowout.
All the packing materials disposal must meet local
regulation.
銳利邊緣危害！
在取出本產品或安裝本產品請戴
防護手套！
本產品的安裝作業僅能
由專業作業人員執行！
3.
安裝
3.1
取出產品
小心！蒸發器的鰭片相當銳利，在安裝前
請勿
移
除保護的瓦楞紙板。當移除瓦楞紙板後，安裝過程中
請戴
防護手套。
蒸發器包含了外露之延伸集管與水盤，只能以垂
直方式放置。不可將水盤側或上方集管側直接放置於
地上。如需將蒸發器放置於地面上時，請垂直放置，
並於下方放置瓦楞紙板並避免傾倒。棧板包裝的產品
皆附有一條黑色調整束帶，當取出一組產品後，請以
此束帶將棧板上產品束緊以防止傾倒。
所有的蒸發器在裝運前內部皆有充填氣體維持
正壓，以避免水氣進入管路內部。在連接管路前以切
管刀切割出入管時，請注意管內部氣體噴出
。
所有包裝素材的拋棄必須依照當地廢棄物處理
法規辦理
。
Place on the ground vertically
and prevent falling down.
請垂直放置於地上並防止傾倒。
Sharp Edges Hazard!
Be careful of sharp Fin edges!
小心銳利邊緣傷害!
請注意鰭片的銳利邊緣！
Protection corrugated
cardboard
保護瓦楞紙
Caution!
Pressurized Gas Inside!
小心！內封加壓氣體！
After removing a unit, using the
black adjustable belt to
retighten the rest units.
當取出一組產品後，請調整束
帶將棧板上產品束緊。