11
Replacing fan motor
風扇馬達更換
Caution
！
Please do DISCONNECT the main power
line before replacing fan set!
Aloft working must be executed under local
safety regulation!
Wiring work must be executed by
professional technician and follow the
related electric codes!
If fan motor is out of order, please follow the procedure listed below.
如果風車馬達故障時，請依照下述程序執行
:
1.
For security reason, TURN OFF SYSTEM and DISCONNECT the
main power line before replacing fan.
為確保安全，在更換風車組之前先將系統關閉並將主電源斷
電。
2.
Take off all the air blades. Remove the fan blade by removing M6
nut.
移除所有導風片。旋開 M6 螺帽拆下葉片。
3.
Cut the cable ties to make it easy to remove the fan frame.
剪斷紮線帶以利移除整組風扇框。
4.
Remove four M4.2 screws of fan guard. Take the whole fan set
down.
將導風罩的四個固定螺絲卸下，將整組風車組拆下。
5.
Cut off the power line, change new fan set or replace broken motor
only. Drain hole of motor must face down!
剪斷電線，更換故障的馬達，注意馬達洩水孔必須朝下！
Be careful, do not reserve long power line inside the fan guard
to avoid interference with fan blades. Do remember face
down the drain hole to let condensate water flow out.
注意，不要預留過長的電源線在導風罩內，以免造成與扇葉
的干涉。請務必使馬達排水孔向下，以利冷凝水排出。
6.
Cut the power line to suitable length, avoid interference between fan
blade and power line. Re-fix the fan frame back to casing. Use
the cable ties to fix the power line on motor support.
將新的電源線剪短至適當長度，重連接電源線。使用束線帶將
電源線固定在馬達固定架上。
7.
Fix back the fan blade on to motor. Install back air blades.
將扇葉固定回馬達。裝回導風片。
8.
Reconnect the main power, turn on the system.
主電源送電，開啟系統。
注意！
在更換風車組之前必須要將總電源關閉
!
高空作業必須依照當地安全法規執行！
電路接線工作必須由專業技術人員並依
照國家電工相關法規執行！
Unscrew 4 screws.
卸下
4
個固定螺絲。
Drain hole of motor must face down.
馬達排水孔必須向下。
Unscrew M6 nut to remove fan blade.
旋開
M6
螺帽拆下葉片。