iCharger Synchronous Balance Charger/Discharger
4010DUO
- 32 -
Pulse Measurement
Select
SYSTEM MENU
→
Extra Function
→
Pulse Test
to enter the pulse test interface, only
J2
port supports the input
signal of Pulse Measurement.
USB & SD Card Use
4010DUO is the HID device of USB, supported by windows system directly, dispense with installing additional
drivers. The USB icon will light up on the lower right corner of the screen when the 4010DUO connects with
computer normally.
The SD icon will light up on the lower right corner of the screen when the SD card is inserted. If 4010DUO connects
with the USB without running a program, the new added U disk can be found on the "My Computer” of the PC, and
can operate the file.
Log
files are stored in the
X: \ Junsi \ iC4010DUO \Log
folder and config. files are stored in the
X:\Junsi\iC4010DUO\System
folder.
Note: 1. The file system of SD card must be FAT or FAT32.
2. Data in SD card needs to be backed up in case it is lost.
Warranty & Service
The product from the date of purchase enjoys free repair service within one year under normal conditions of use.
Over the warranty, if replacement parts are needed the appropriate charge for components and repair will apply.
During the warranty period, any of the following circumstances will not enjoy free repairs:
1) Failure to use in accordance with the requirements of the user manual.
2) Failure or damage caused by the unauthorized user dismantling, appending or modifying the charger.
3) Failure or damage due to natural disasters, bruises, collisions and incorrect supply voltages.
Auto CW/CCW Test:
Click
Test
button then the
pointer deflects the setting times at a set rate back
and forth among each setting values, and the servo
responds accordingly.
Speed Test:
Click
Test
to read the test curves and test
results.
Note:
Current Sample, is the sampling value the AD
for servo current, there are 300 sampling point in total.
300 * sampling rate = the entire sampling time, which
must be larger than the servo speed, if not, it will fail
to test the speed.