icetro ISI-271SHS, User Manual

Page: 54 / 85

54
Cleaning method
2. Open the cover of the MIX TANK, and then remove and clean the
carburetor (the body), Impeller.
5. Detergent to clean the residue with clean water.
4. Press ‘ STOP’ button to stop operation of ‘ WASH ’ process,
remove the impeller from the MIX TANK.
Wipe the inside of the MIX TANK with clean rag wet in neutral
detergent.(Use a neutral detergent )
1. Press ‘ STOP’ button, and then ‘ DEFROST’ on the operation panel.
(Wait about ten minutes until soft ice-cream is melted in the cylinder.)
Impeller
carburetor
● When sterilization is performed once a day, the system shall be cleaned every 14 days as
shown in the figure.
●
The carburetor, impeller, and ice cream discharge port shall be cleaned once a day.
Caution
PASTEURIZE
PASTEURIZE
REGENERATIO N
BOILING
PASTEURIZE
PASTEURIZE
REGENER ATIO N
BOILING
Wash button
Push
button
3. Remove all raw ice cream liquid from the system, and then clean the system as follows:
①
Detach the drain box.
②
Loosen the feed separation screw by hand.
③
Place a drain container under the dasher cover.
④
Press the ‘ PUSH BUTTON ’ on the right to operate the system, and then press the blue
Cleaning/Dispensing button on the upper left side to discharge the ice cream liquid completely
from the storage tank. Afterward, rinse the storage tank two or three times with clean water.
feeder
drain box
feed separation screw