13
How to Disassemble the Panel
1. Top Panel: Loosen the 2 rear screws, push the top panel back,
and lift it up to disassemble.
4. Front Cover: After removing the top panel, remove the fixing screws
and disassemble by tilting it forward.
2.
Side Panels: Remove the front drain box and the top panel, loosen
the front and rear lower screws, and then spread the bottom left
and right, then lift up to separate.
3.
Front Panel: Loosen the two lower left and right screws, pull the lower part
toward the front, and lower it to disassemble.
※ Please assemble in the reverse order of disassembly.
※ Ice Chute Cover: It is disassembled by pulling the
lower part toward the front. When assembling, align it
with the upper groove and push the lower part upward
to fix the hook.
(If the ice outlet cover is removed, the dispensing
operation does not work)
Front panel
Side panel
Side panel
Top Panel
Summary of Contents for ID-0160-AN
