icetro IC-0170A, Technician'S Handbook

Page: 30 / 166

Step 7
Mix a solution of sanitizer and warm water.
Solution Type Water Mixed With
Sanitizer 3 gal. (12 l) 2 oz (60 ml) sanitizer
part number 9405653
Use half of the sanitizer/water solution to sanitize all
removed components. Use a spray bottle to liberally apply
the solution to all surfaces of the removed parts or soak
the removed parts in the sanitizer/water solution. Do not
rinse parts after sanitizing.
Step 8
Use half of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and bin.
Use a spray bottle to liberally apply the solution. When
sanitizing, pay particular attention to the following areas:
• Evaporator plastic parts - including top, bottom and
sides
• Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 9
Replace all removed components, wait 10
minutes, then reapply power to the ice machine
Step 10
Set the 'ICE/OFF/WASH' switch to 'WASH'.
Water will flow into the through until it satisfies the float
switch(s). The water pump will energize and begin to
circulate the water/sanitizer solution mixture throughout
the water circuit.
Model Amount of Sanitizer
Part Number 9405653
IC-0170 2 ounces (60 ml)
IU-0170 2 ounces (60 ml)
Wait until the sanitize cycle is complete (approximately
21 minutes) then set the 'ICE/OFF/WASH' switch to 'ICE'
to start ice making.
IC-0220 2 ounces (60 ml)
IU-0220 2 ounces (60 ml)
29