11
4. What to check prior to installation
■ Follow this process! ■
230V~50Hz
Water source valve
Water source tube
Drain hose
- The water supply valve may have different shapes depending on the installation condition.
- The filter may be located close to the water source or back of the product depending on the situation.
There may be some water inside the product, which is from the test procedure
of the manufacturing process.
It does not mean that the product has been used prior to installation, so rest
assured that you have a new product.
Avoid uneven surface or any place with too much moisture,
direct sunlight, too much dust, or spattering water.
For your
information
Water inlet: Connect the water tap adaptor to the water supply
connection port near the water supply valve.
Drain connect: 3/4" PT
- In order to guarantee optimal operation of the product, consult with our technician
on how to install the product. (Contact our authorized technician in case of moving
the product after the initial installation.)
- Be sure to connect the water supply adaptor to the cold water drainage pipe.
- The ice maker provides optimal functionality at room temperature of 10 ~ 20 ℃
and supplied water temperature of lower than 10 ℃.