ICETEAM 1927 COMPACTA VARIO US, Instruction Handbook Manual

Page: 35 / 54

Compacta VariO US
- 35 -
Compacta VariO US - 2018/05 - Rev. 01
EN
4.10 PROCESS AUTOSETUP
Pressing Decrease button from the Stop mode (both boiler and batch freezer) for about 10", the
autosetup of cycle values is carried out. Values such as temperature set or consistency set are reset
to default values in any process (heating cycles, ice cream cycles, both automatic and free ones).
The following message will be displayed:
AUTOSETUP
RECIPES
4.11 ENABLING/DISABLING PROCESS
To enable processes:
Select the process as if to run it, when the name of the cycle to disable is displayed press and hold
Ice Cream button (if in Freezing cycle) or Heating button (if in Heating cycle) until the selected
cycle is disabled (indicated by an acoustic signal) and the following cycle is displayed.
NOTE: If the only Heating cycle enabled is Free Heating, press Heating button from Stop mode
to immediately access the Charge selection.
NOTE: If all the Heating or Freezing cycles are disabled, the display shows "No Programs"
when the relevant key is pressed. Enable the recipes again as follows:
Enabling all the processes:
From Stop mode, press
Compacta
12
Vari
elite
button for 10", "Loading Programs" is displayed and all the
processes (both of heating unit and of freezing unit) are enabled.