ICETEAM 1927 COMPACTA VARIO US, Instruction Handbook Manual

Page: 19 / 54

Compacta VariO US
- 19 -
Compacta VariO US - 2018/05 - Rev. 01
EN
3.5 ELECTRIC CONNECTION
The machine must be installed in compliance with the current electrical installation regulations.
Before connecting the machine to the mains, check that machine voltage indicated on the
identification plate corresponds to that of the mains.
Place between the mains and the machine a differential magnetothermal protection switch, with
contact opening of 3 mm (0.118 in) at least and adequately sized to absorption capacity required.
IMPORTANT
Yellow/green wire MUST be connect to a good ground plate.
Beater rotation
By machine models
Compacta VariO
the direction of beaters rotation is
anticlockwise.
Reversing the rotation direction
If the direction of rotation is not correct, interchange two of the three leads coming from the
circuit breaker.