![background image](http://html1.mh-extra.com/html/icegame/dodgeball/dodgeball_service-manual_3384898092.webp)
92
BALLGATE:
How to measure the voltage at connector P15 when testing your actuators. Do not measure
between the black/blue and orange/blue on P15, you will never see the12VDC.
Use pin 5 or 6 on P11 (where the black wires go to).
Your should see the following:
● When the ball gate is up even in attract if you put the red meter lead in the black/blue on
P15 there should be +12VDC.
● In game play when the ball gate is up, he should see +12V if you move the red meter lead
on the orange/blue at p15.
● If you see +12V when you do both of these things, then the board is working properly.
● It may not be exactly
12V. If it is 11.5 or so, then it is good. If not,
there
some sort of
voltage drop.
WH2134DBX
Main board
Summary of Contents for DODGEBALL
