•
LNB Type
: Specify what type of LNB is used.
•
LNB Frequency
: Specify what frequency the LNB generates. A dual-band
LNB, also called universal LNB, generates two alternative frequencies to re-
ceive a wider band of satellite frequencies.
•
LNB 22 kHz
: Either turn this on or off to pick up a higher or lower frequency
band.
•
DiSEqC Switch
: If one or more typical DiSEqC switches are used, this option
must be set properly. Specify which of the DiSEqC ports is connected to the
intended dish.
On this screen, users can change satellite and transponder data.
Rename a satellite
: Choose
Satellite
and select a satellite. Press the red button
and then enter a new name using the on-screen keyboard.
Edit a satellite’s longitude
: Choose
Satellite
and select a satellite. Press the
green button and then modify the longitude.
Clear all transponders of a satellite
: Choose
Satellite
and select a satellite. Press
the yellow button and then confirm to clear them.
Add a transponder
: Place the focus on
Frequency
and press the green button.
Specify the frequency, symbol rate, and polarization.
Edit a transponder
: Choose
Frequency
and select a transponder. Press the yel-
low button and then modify the transponder’s details.
Delete a transponder
: Choose
Frequency
and select a transponder. Press the
red button and then confirm to delete it.
Unicable Settings
If the user’s house is equipped with a single cable router, configure unicable set-
tings properly.
Open the apps screen and select
Settings
>
Dish Setting
. Set
LNB Type
to
Uni-
cable
and then choose
Unicable Setting
. Choose
Config Mode
and determine
whether to scan for all available channels or a specific channel. Specify the de-
tails, such as port and predetermined intermediate frequency.
S C
23
