This document is the sole property of
ICE. No duplication nor release to third
party
is
allowed
without
prior
authorization
Installation guide
NP800R
Date : 01/2012
Print :23/08/2012
Sheet :
5
Issue : a
Condition of transport and storage
2.2
The protective relay is delivered in a cardboard.
Unpacking requires no special remarks.
We should beware however to avoid too important shocks on the device.
Transport
2.2.1
NP800R is delivered in rigid cardboard packaging with dampers in Polyethylene low Density able to absorb
shocks due to transport.
Storage
2.2.2
Storage Temperature: - 25°C to + 70°C.
Unpacking
2.3
During extraction of NP800R of the box, be careful to avoid shocks and not to distort the case.
Conduct an audit of the general appearance of the product before installation.
Consider making eliminate packaging through an appropriate recycling circuit.
Packaging
2.4
For packaging, put the protective relay front face up in the shipping container.
Ensure that the front face is not in contact with a material able to scratch it.
Climatic conditions
2.5
The numerical protection NP800R is intended to operate indoor.
Temperature:
•
Nominal operating: -10°C to +55°C.
Relative humidity at +40°C / 56 days: 93%
