ICE iW90
5
OPERATOR
STORAgE
1) Unplug machine from power source and wrap cord on handle.
2) Store in upright position in a dry area.
3) Store with squeegee assembly off the ground.
4) Store with clear window off unit so that tank may breathe.
MAINTENANCE
To keep the machine performing well for many years, please follow the following
maintenance procedures.
Always confirm that the machine is unplugged prior to performing any
maintenance or repairs.
1) Unplug machine as soon as you are done using it.
2) Check power cord for any damage. If any damage is detected, replace the cord
immediately.
3) Lubricate casters with a water resistant lubricant every month
4) Check machine for loose or missing nuts and bolts, and replace as necessary.
5) Check the filter, and clean it after each use
6) Remove the vacuum hose and check it for any holes and clogs
7) Clean the outside of the machine with a mild cleaner
Do not operate machine without bag or filter properly installed.
3) Replace clear window on the top of the recovery tank.
4) Connect vacuum hose to inlet on the machine body.
5) Attach appropriate accessory tool for the job to be completed.
6) Make sure the Main Power Switch is in the OFF position, then plug power
cord into a grounded outlet.
Do not use an extension cord in conjunction with the standard power
cord.
7) Turn power switch to “on” position.
8) Check the filter bag periodically to see if it is full. For optimal
performance, replace bag when it is 3/4 full.
DRAININg THE RECOVERY TANK
1) Unplug machine from power outlet.
2) Transport machine to nearest floor drain of bucket.
3) Remove drain hose form rear of machine. Remove ball plug from drain
hose, and drain the contents of the tank.
4) After the contents have drained, remove the clear window and rinse
recovery tank with clean water.
5) Replace the ball plug on the drain hose and hang hose back on the rear
of the machine.
To prevent odors in the recovery tank, remover the vacuum head when
machine is not in operation to allow air to circulate.
Summary of Contents for iW90
Page 8: ...ICE iW90 7 OPERATOR ...
Page 11: ...10 ICE iW90 OPERATOR ...
