42
Reassembly if you have the optional Q/R kit.
•
Stand the handlebars up and secure the quick-releases. Check that they are tight.
•
Fit the front wheels and secure the quick-releases. Check that they are tight.
•
Fit the front mudguards.
•
Return the front boom to its original position. Either pull out the front boom, or push it back in if you
removed it (take care not to damage the thin plastic shim inside the main frame tube). Secure the quick-
releases, and check that they are tight.
Reassembly from the standard fold
•
Lift up both rear chain tubes, and hold them up to the lower rack mount. Fold the back legs out from under
the frame. Secure the Velcro retaining strap.
•
Replace the rear wheel. Hold the derailleur mechanism back out of the way if necessary. Ensure the chain is
engaged on the smallest sprocket. Secure the quick-release, and check it!
•
Replace the rear mudguard and or the rear carrier, and check they are secure.
•
Replace the seat. Place the seat on the lower seat cup on the main frame, and slide the seat clamps back
over the seat cup. Fasten shut the two quick-releases on the clamps. Hook the top seat support back onto
the quick-release behind the seat, then secure and check the quick-release.
Summary of Contents for 2009 Trice Q
Page 4: ...4 1 2 Overview...
