background image

ICE Series

 

     

Introduction

 

 

Page i 

 

How To Use This Manual 

 
Ice-O-Matic provides this manual as an aid to the service technician in installation and maintenance of the 

ICE Series 

(electro-mechanical) cube ice machines.  Do not attempt to perform installation, start-up or 

maintenance unless you have read and fully understand this manual.  
  

For a Service Provider, please reference our “Find a Service Technician” tab at www.iceomatic.com 

 

Keep this manual for future reference. 
 

The ICE Series Service Parts Manuals are available separately. 

 
Ice-O-Matic icemakers and dispensers are not approved for outdoor installation. 
 
WARNING:  Always disconnect electrical power and shut off water supply whenever maintenance or 
repairs are performed on the ice machine and related equipment. 
 
CAUTION:  Always wear protective eyewear whenever maintenance or repairs are performed on the ice 
machine and related equipment. 
 

 Ice-O-Matic has partnered with ENERGY STAR since 2004 to ensure our customers receive the 

most efficient ice machines for your investment dollar. Ice-O-Matic is committed to the continuous 

improvement in both energy efficiency and productivity thereby delivering the best value in energy 

efficient ice machines money can buy.  

For a detailed list of ENERGY STAR qualified Ice-O-Matic ice machines, go to: 

 

http://www.iceomatic.com/Products/Sales-Literature/#

 

 

Plant-a-Tree Program 

 

As part of our commitment to the global environment, Ice-O-Matic is devoted to sustainability in 
every aspect of our business. To offset the carbon footprint of our factory in Denver, we not only 
recycle materials in our packaging and manufacturing but also recycle our industrial and office 
waste products. 

More important, we partner with AMERICAN FORESTS and plant a tree for every ice machine 
we sell, thereby supporting reforestation of key regions throughout the world. Our goal is to 
plant 150,000 trees through our Global Sustainability program. Trees reduce topsoil erosion, 
prevent harmful land pollutants from getting into our waterways and replace air pollutants with 
fresh, clean oxygen.  

 

Ice-O-Matic Warranty 

 

Every Ice-O-Matic ice maker is backed by a warranty that provides both parts and labor coverage. To view the 
warranty details, register products, or check your warranty status visit the “Warranty and Water Filter Registration” 
page on www.iceomatic.com

 

Summary of Contents for ICE2107R




























Reviews: