CD10022
CD20030
CD10522
CD20530
Removal and Replacement
Gear Motor:
1. Disconnect electrical power.
2. Locate key and remove front panel.
3. Remove dispenser wheel.
4. Disconnect wires at gearmotor.
5. Remove 4 bolts securing gearmotor bracket to
cabinet.
6. Pull gearmotor out of cabinet.
7. Remove gearmotor from bracket.
8. Reverse steps to reassemble.
Dispense Wheel:
1. Remove all of the ice stored inside
the dispenser bin and shut off the
ice maker.
2. Disconnect the electrical power.
3. Remove ice machine from dispenser.
4. Remove large dispenser top panel.
5. Reach into opening, locate the
sweep arm which secures the wheel to
the drive shaft. Remove the sweep arm.
6. Pull the wheel off the drive shaft and
remove it from the dispenser.
7. Revese steps to reassemble.
16
Electrical shock hazard.
Electrical shock can
cause personal injury.
Disconnect power before
begining to service
components.
