10
ICCONS® GAS TOOL GT6-IXF USER MANUAL
6 Troubleshooting
WARNING:
To reduce the risk of serious
personal injury, ALWAYS unload
the battery, the nails and fuel
cell from the tool before all
repairs.
6.1 Battery/Charger Problems
SYMPTOM 1
Battery Cell does not appear to accept
charge. Green charger light does not come on
after several hours.
Possible
reasons
Services
Inoperative
indicator lights
on charger.
Try Battery in tool after
1 hour on charge cycle.
If tool functions properly
charger lights are not
working correctly. Replace
charger, or monitor time
to ensure Battery Cell
has adequate time for
recharging. It’s normal for
Battery to feel warm after
properly charging.
Damaged
charger.
Discontinue use
immediately and unplug
from power source.
Replace charger and tag
or dispose of charger to
prevent accidental reuse
or connection to power
source.
SYMPTOM 2
Red L.E.D on charger is blinking.
Possible
reasons
Services
Battery is hot.
Remove battery from
charger and allow to cool.
Inspect battery charger
and cartridge.
SYMPTOM 3
Orange L.E.D on charger is blinking.
Possible
reasons
Services
Charger
Damaged
Replace Charger.
6.2 Normal Stage of Operation
SYMPTOM 1
Fan does not run.
Possible
reasons
Services
Battery is not
charged.
Charge Battery according
to Operating Manual.
Battery
Terminals or
Handle battery
contacts are
oily, dirty, or
corroded.
Clean Battery Cell
terminals, Clean Tool
Battery Cell contacts as
required.
There is
electrical short
somewhere.
The tool must be
assessed by Authorized
Service / Repairer.
SYMPTOM 2
Fan does not run, or runs slower than normal.
Possible
reasons
Services
Battery is
discharged.
Charge Battery Cell.
SYMPTOM 3
Fan runs intermittently.
Possible
reasons
Services
Battery is loose
or contacts are
bent.
Snap battery back into
its locked position. Bend
contacts back into proper
position.
