ICC
80
Figure 65: MSG Instruction Selection
b)
Select the “XIO” instruction from the “Bit” classification, then click OK. Refer to Figure 66.
Figure 66: XIO Instruction Selection
5)
Configure the MSG instruction.
a)
Set the “Read/Write” field to “Read”, “Target Device” field to “PLC5”, “Local/Remote” field to
“Local”, and “Control Block” to “N20:0”.
b)
Upon hitting the <ENTER> key while in the “Control Block” entry box, the MSG Properties
dialog box should appear (or it can be opened by clicking on the “Setup Screen” button at the
bottom of the MSG instruction). Refer to Figure 67.