57
1)
The DPF will not regenerate if the engine management light is on, or
there is a faulty EGR valve.
2)
The ECU must be re-adapted when replacing the DPF and adding the
fuel additive eolys.
3)
If the vehicle needs to be driven in order to perform a DPF service,
ALWAYS have a second person help you. One person should drive the
vehicle while the other person observes the screen on the Tool. Trying to
drive and observe the Scan Tool at the same time is dangerous, and
could cause a serious traffic accident.
Using
Land Rover
as an example:
To preform DPF functions
1. Tap the
Service
application button from the CR Genius Job Menu.
2. Tap
DPF
icon and wait for the vehicle manufacturer screen. Then tap
Land Rover
icon from the screen. Waiting for vehicle
communication.
3. You can tap
Auto Identify
to acquire vehicle VIN information and
tap
OK
to confirm. Or you can tap the
Vehicle Select
to choose the
correct vehicle according to the on-screen instructions. For details,
please refer to the introduction of the vehicle identification chapter.
4. Select the "Powertrain - Diesel Particulate Fitter Dynamic
Regeneration" option in the function list.
Figure 5-41
Sample DPF Service Function Menu 1
5. Carefully read the on-screen prompts on the conditions for dynamic
regeneration of the diesel particulate filter, and pay special attention
to the need for two people to perform this operation.
