47
Figure 5-26 Sample Injector Function Screen 6
5.6 Steering Angle Sensor (SAS) Service
SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering
wheel to straight ahead, or recalibrates SAS while steering part replacement.
Calibration must be completed after the following operations:
Steering wheel replacement.
Steering angle sensor replacement.
Any maintenance involving opening the connector hub from the steering
angle sensor to the column.
Any maintenance or repair work on the steering linkage, steering gear or
other related mechanism.
Wheel alignment or wheel track adjustment.
Accident repairs where damage to the steering angle sensor or assembly, or
any part of the steering system may have occurred.
NOTE
1) ICARSOFT accepts no responsibility for any accident or injury arising from
servicing the SAS system. When interpreting DTCs retrieved from the
vehicle, always follow the manufacturer’s recommendation for repair.
2) All software screens shown in this manual are examples, actual test screens
may vary for each vehicle being tested. Observe the menu titles and
on-screen instructions to make correct option selections.
3) Before starting the procedure, make sure the vehicle has an ESC button.
Look for the button on dash.
