iCarsoft BMM V3.0, User Manual

Page: 19 / 55

EN
15
To perform signal turn signal lamp action test (take left turn signal
lamp as an example):
1) Enter the action test and select left turn signals.
2) At this time, the signal indicator is not running.
3) Press the [Start] button to
execute the action.
4) At this time, the signal
indicator
is running,
indicating that the action is
being executed. Press the
[stop] button to stop.

Window regulator front / rear left / right: down / up
Through the window regulator action test item, you can control the
whole vehicle window up and down to test whether the window up
and down works normally.

Windshield wiper motor (V) stage 1 / 2
Through the action test item of windshield wiper motor, the wiper
can be controlled to work at 1 / 2 gear to test whether the wiper
motor works normally
 Basic settings --- Basic Setting means reset some basic parameter
settings for each control module, especially some parts / sensors, etc.