iCarsoft BMM V3.0, User Manual

Page: 12 / 55

EN
8
6.1.1.3 Vehicle Select
When the vehicle cannot be retrieved automatically through the ECU of
the vehicle, or the specific VIN is unknown, you can manually select the
vehicle. Or in some cases, when the user selects vehicle selection rather than
vehicle VIN scanning, the system will provide the option of vehicle selection,
and the user can select the vehicle model, model year, etc. according to his
own model.
To perform vehicle selection:
1) Click the diagnostic application button in the device
’s job menu. Vehicle
menu display.
2) Select the brand of the test vehicle.
3) Choose the "vehicle selection" option to make a series of selections
according to the on-screen prompts, select the correct vehicle model,
model year, etc.
4) Select step by step according to the screen prompts, and finally enter the
list of diagnosis modes.
5) The user performs various operations by selecting the diagnostic mode.
6.1.2 Diagnostic mode
The scan tool provides five diagnostic modes for users to choose, as
shown in the figure below: Quick Test, Auto Scan, Control Unit, Service, Quick
Erase. For the quick erase mode, it is in the form of a button. Users need to go
to the next layer to quickly clear the vehicle fault information recorded in the
diagnosis process.