iCarsoft BMM V3.0, User Manual

Page: 17 / 55

EN
13
the figure below.

Clear fault memory
– After reading the vehicle fault code and completing
the repair, this function can be used to clear the original fault code. Before
clearing the fault code, make sure the vehicle engine is off and the ignition
key is in the on (run) position. Erase full electronic system module fault
code and diagnostic related freeze frame information.

How to clear the fault code:
1) Select the [Clear fault code] on the "function menu"
2) At this time, a warning message will appear on the screen, indicating
that the fault code and frozen data information will be cleared.
a) Select [OK] to continue. After the operation is successful, an
interface will be displayed on the screen.
b) Select [Cancel] to exit.
3) Re-enter the [Read fault code] function to retrieve the fault code to
ensure the successful code clearing operation.

View data
–When this function is selected, a list of data for the selected
module is displayed on the screen. The options available for different
vehicle control modules will vary. These parameters are displayed in the
order sent by the electronic control module, so there will be differences