20
Step two: For example, if your password is 0000 and the first receiver number is
0915111111. Then you enter “*0000*22*0916111111#”
Step three: Send the message to S SERIES Security Phone. When the LED light is on,
setup is completed. A confirmation message will send to the pre-programmed first
receiver in a few seconds.
How to use: Press SOS Button on both sides. When the S SERIES Security Phone
vibrates, SOS message is sent to the preprogrammed receivers.
* Setup SOS receivers (3)
Step one: Access to “write message” function in mobile phone with display, enter
“*password*23*number#”. (Original password is 0000).
Step two: For example, if your password is 0000 and the first receiver number is
0915111111. Then you enter “*0000*23*0917111111#”
Step three: Send the message to S SERIES Security Phone. When the LED light is on,
setup is completed. A confirmation message will send to the pre-programmed first
receiver in a few moments.
How to use: Press SOS Button on both sides. When the S SERIES Security Phone
vibrates, SOS message is sent to the preprogrammed receivers.
4-4-2
Setup SOS message
See SMS setup in section 4-3-2
4-5
Earphone
Earphone is available with S SERIES Security Phone
Step one: insert earphone to the earphone port as shown in the diagram below
Step two: answer and make calls via earphone
4-6
Speaker Volume
To change speaker volume during a call, press speed dial key 1 to increase volume and speed
dial key 2 to decrease volume
