18
Step three: Send the message to S SERIES Security Phone. When the LED light is on,
setup is completed.
How to use: Press third speed keypad for three seconds until the red and blue light is
on, and then the message is sent.
*Set up SMS (4)
Step one: Access to “write message” function in mobile phone with display, enter
“*password*T4*number#”. (Original password is 0000).
Step two: For example, if your password is 0000 and the SMS is “Teacher, I am
home”. Then you enter “*0000*T4*Teacher, I am home#”
Step three: Send the message to S SERIES Security Phone. When the LED light is on,
setup is completed.
How to use: Press forth speed keypad for three seconds until the red and blue light is
on, and then the message is sent.
*Set up SOS message
Step one: Access to “write message” function in mobile phone with display, enter
“*password*T5*number#”. (Original password is 0000).
Step two: For example, if your password is 0000 and the SMS is “Mum, I am sick”.
Then you enter “*0000*T5*Mum, I am sick#”
Step three: Send the message to S SERIES Security Phone. When the LED light is on,
setup is completed.
How to use: Press SOS Button on both sides. When the S SERIES Security Phone
vibrates, SOS message is sent to the preprogrammed receiver.
4-3-3 Change message text
To change the SMS, repeat section 4-3-2 in the user manual. Previous SMS will be replaced
with the new messages.
4-4 SOS Group Informing
Step one: In case of emergency, press SOS Button on both sides for 3 seconds
Step two: Release the keypads when the phone vibrate for 0.5 seconds. The fixed SOS
message is then sent to the three preprogrammed receivers.
Step three: Once the SOS message is sent to the three preprogrammed receivers,
