Icare ic100 Quick Manual Download Page 4

Page: 4 / 4

_EN
_1

PARTS OF THE TONOMETER

CLEANING THE PROBE BASE

The probe base can be reused after careful cleaning. Make sure
that the probe base is completely dry before using it.

Unscrew the probe base collar and carefully remove the probe
base from the tonometer.

2. Invert the probe base over a container filled with 70-100 %

alcohol solution, allowing the probe base to drop into the
container and let soak for 5 - 30 minutes.

3. Dry the probe base by blowing some compressed air into it.

4. Carefully reinsert the completely dry probe base, screw the

collar back into the tonometer.

Please refer to the manual for more detailed instructions of
changing and cleaning the probe base.

CHANGE/CLEAN THE PROBE BASE REGULARLY TO AVOID
UNNECESSARY SERVICE.

www.icaretonometer.com

Forehead support

Probe base and probe base light

Collar

Navigation buttons

Forehead support adjusting wheel
Display
Measure button
Select button

Please refer to the manual
for additional information.

Summary of Contents for ic100

Page 1: ...QUICK GUIDE ENGLISH Rx Only MEASURE...

Page 2: ...tive ways of starting Remember to use the wrist strap 2 Open the probe tube by removing the cap and insert the probe into the probe base as shown in the image 3 When the Play symbol appears on the dis...

Page 3: ...center of the cornea The distance from the tip of the probe to the patient s cornea should be 4 8 mm 5 32 5 16 inch The probe base light must be green Step 3 Press the Measure button to measure IOP P...

Page 4: ...he container and let soak for 5 30 minutes 3 Dry the probe base by blowing some compressed air into it 4 Carefully reinsert the completely dry probe base screw the collar back into the tonometer Pleas...