![background image](http://html1.mh-extra.com/html/icare/i3300/i3300_user-manual_3326064020.webp)
20
Step one:
Access to “write message” function in mobile phone with display, enter
“*password*23*number#”. (Original password is 0000).
Step two:
For example, if your password is 0000 and the first receiver number is
0915111111. Then you enter “*0000*23*0917111111#”
Step three:
Send the message to I-care kid’s mobile phone. When the LED light is on,
setup is completed. A confirmation message will send to the pre-programmed first
receiver in a few moments.
How to use:
Press SOS Button on both sides. When the I-care kid’s mobile phone
vibrates, SOS message is sent to the preprogrammed receivers.
4-4-2
Setup SOS message
See SMS setup in section 4-3-2
4-5
Earphone
Earphone is available with I-care kid’s mobile phone
Step one: insert earphone to the earphone port as shown in the diagram below
Step two: answer and make calls via earphone
4-6
Speaker Volume
To change speaker volume during a call, press speed dial key 1 to increase volume and speed dial key 2
to decrease volume
4-7
Switching to Vibrate / Ring mode
Step one:
press speed dial 3 and 4 at the same time.
調音鍵▲
調音鍵▼
Vol.
down
Vol.
up