www.icaretonometer.com
9
PRECAUTION!
Make sure you use batteries with built-in PTC protection, for example Energizer Lithium
Photo 123 3V CR123A.
Update the tonometer’s time to your local time. It is done automatically by performing
the steps 1 and 2 under section 8. Reading the measurement data.
Lift the silicone lid that protects the USB port and
keeps the battery compartment cover in place. Open
the battery compartment cover by pressing the
silicone lid slightly and sliding the battery
compartment cover as shown in the figure left.
1. Silicone lid
2. Battery cover
Insert two CR123A lithium batteries in the correct
order: (+) end upwards as shown in the figure left.
Close the cover firmly and press the silicone lid in
place to cover the USB port.
9.2
TURNING THE TONOMETER ON
PRECAUTION!
The tonometer turns off automatically after 3 minutes if it is not used.
Press the power button (20) to turn the tonometer on. The lights (14-19) are
turned on briefly. Following a brief pause, the Load light flashes on the back
panel to remind the user to load the single-use probe into the tonometer prior to
measurement.
English
Opening the silicone lid and battery cover
Inserting new batteries
1.
2.
2 x CR123A
Icare HOME tonometer Instruction manual for health care professionals
9.
SETTING UP THE TONOMETER
Setting up your Icare HOME tonometer is easy, with few steps. The following
subchapters describe how you get started.
9.1
INSTALLING OR CHANGING THE BATTERY
Icare HOME
Icare HOME tonometer Instruction manual for health care professionals
ENGLISH
9
www.icare-usa.com
